Template:Move/doc

	This template uses Cargo:
	Special:CargoTables/Move

	This template uses Lua:
	Module:Move Module:Move/functions Module:Move/game

This page is for Tekken 8. For Tekken 7, see Template:Move7.

This template is used to show detailed information for a single move and store that information in a Cargo table. It should only be used in movelists.

The first use of this on any page should include {{MoveDataHeader}} before it.

Related templates

• {{Move}} - show detailed information for a move and store it in a cargo table.
• {{MoveQuery}} - show detailed information for an already defined move.
• {{MoveGet}} - get one field of an already defined move.
• {{MoveInherit}} - create a new move based on an already defined move. Primary usage - inherit properties of a generic move.
• {{PunisherTable}} - show information for character punishers and store them in a cargo table. Depends on the data defined by {{Move}}.
• {{PunishmentChart}} - display a chart of punishment damage for a character. Depends on the data defined by {{PunisherTable}}.
• {{WhiffPunisherTable}} - show information for character whiff punishers. Depends on the data defined by {{Move}}.

Usage

Be sure to be familiar with Movelist to know what appropriate values are.

{{MoveDataHeader}} <!-- Include this at least once on every page using MoveData -->
{{Move
|id=Lee-uf+3
|parent=
|input=uf+3
|target=m
|damage=12
|startup=i25~26
|block=-9
|hit=+2
|crush=js12~
|recv=r27
|tot=53
|range=3.09
|tracksLeft=18
|tracksRight=9
}}
{{Move
|id=Lee-uf+3,1
|parent=Lee-uf+3
|input=,1
|name=Brilliant Rosé
|target=,m
|damage=,18
|startup=,i21~22
|block=-12
|hit=+3
|ch=[[Lee combos#Staples|+26a]]
|recv=r30 FC
|tot=78
|range=4.27
|notes={{Plainlist|
* Floor break
* Combo from 1st hit}}
}}

For frame advantages:

• Link to the combo page if it leads to a combo (even if the page doesn't exist yet).
• Always write +0. Do NOT use -0 or 0 without an operator.

Parameters

All parameters are blank by default and can be left blank without issue. However, every move should at least have an id and input.

Parameter	Required	Description	Example
id	✔︎	A unique id for the move. Usually equal to ${fighterName}-${fullInput}.	Jin-1,2,3 King-df+1
parent		The parent of the move, if any. Usually this is previous move in the string. Parent move itself must be defined before its child.	Jin-1,2 is a parent of Jin-1,2,3.
input	✔︎	The primary canonical input of the move, not including previous moves in the string. This should not include any aliases or alternates, which are indicated by alias and alt respectively. Start with a comma if there were previous moves. Start with a : or ~ instead if that's what the notation calls for, but write the colon as : or it'll break things.	Jin-1,2,3 has input=,3 Jin-b+1+3 has input=b+1+3 and alt=b+2+4 Jin-b,n,f+2 has input=b,n,f+2 and alias=b,f+2 Jin-b,n,f+2,3 has input=,3 and alias=b,f+2,3 Lee-d+4,d+4 has input=,d+4 and alias=D+4,4
alias		NOT YET IMPLEMENTED Any non-canonical ways of notating the move's input. For strings, this is written in full. If there is more than one alias, use a {{Dotlist}}. Most common case is non-standard stance abbreviations and short forms for motion inputs. This is used by frame data bots and other search tools to find the move. It also shows in the movelist notes as "Sometimes written [...]".
alt		NOT YET IMPLEMENTED Any alternate inputs that also perform the same move. For strings, this is written in full. If there is more than one alternate input, use a {{Dotlist}}. Most common case is jumping and crouching moves where f or b don't affect the move, and for parries where 1+3 and 2+4 both work. When the alternate input would place the move somewhere else in the movelist, or when it's not clear which is the primary input, such as with Claudio's FC.df+2 and f,F+2, it's usually better to copy it with {{MoveInherit}}, with both entries listing the others as alternates. This shows in the movelist notes as "Alternate input [...]".
name		The name of the move, if any.
target		The hit level of the move, not including previous moves in the string. Start with a comma if there were previous moves.
damage		The damage of the move, not including previous moves in the string. Start with a comma if there were previous moves.
startup		The startup of the move, not including previous moves in the string. Start with a comma if there were previous moves. Leave blank if you don't want to measure it.
block		The frame advantage on block.
hit		The frame advantage on hit.
ch		The frame advantage on counter-hit. Leave blank if the same as on hit.
crush		The frames where this move will crush, powercrush, or parry.
recv		The number of frames the move takes to recover, starting with an r. Indicate the state after recovery if the move doesn't recover standing.
tot		The total number of frames for the whole move. For strings, this count is from the start of the string with no delays.
range		The range of the move, as per Movelist#Range.
tracksLeft		The tracking score, as per Tracking#Measurement, to the attacker's left (i.e. opponent steps right).
tracksRight		The tracking score, as per Tracking#Measurement, to the attacker's right (i.e. opponent steps left).
notes		Anything that doesn't fit elsewhere. See also {{MoveDataIcon}}.

If the name, startup, crush, or notes parameters have multiple values, use a {{Plainlist}}. Exception is if the startup is two short values and it would look better with a space instead of a line break.

|startup=i55 i68
|crush={{Plainlist|
* cs25~45
* js45~}}
|notes={{Plainlist|
* Homing
* Tailspin}}

Data entry

The simplest way to enter the data is to copy this and fill in the blanks:

{{Move
|id=
|parent=
|input=
|name=
|target=
|damage=
|startup=
|block=
|hit=
|ch=
|crush=
|recv=
|tot=
|range=
|tracksLeft=
|tracksRight=
|notes=
}}

Example

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lee-uf+3

uf+3

m

12

3.09

18

9

-9

+2

i25~26

js12~

t53 r27

#Lee-uf+3,1

Brilliant Rosé

uf+3,1

m,​m

12,​18

4.27

-12

+3

+26a

i25~26

,i21~22

t78 r30 FC

• Floor break
• Combo from 1st hit