Lars movelist

Heat

A powered up Limited Entry can be used (H.LEN.1, H.LEN.2)

A new Silent Entry shift move can be used (H.f+3+4)

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

n

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-1

1

h

5

+1

+8

i10

#Lars-1,1

1,1

h,​m

5?

-8

0

#Lars-1,1,1

1,​1,1

h,​m,​m

5,​8?

-12

KND

Heat Engager

#Lars-1,2

1,2

h,​h

5,​?

-3

+8

#Lars-1,4

1,4

h,​l

5,​?

-12

+1

• Hold d to LEN

#Lars-2

2

j

,​?

?

?

#Lars-2,1

2,1

h,​m

10,​?

-6

+8

• Transition to LEN

#Lars-3

3

h

?

-17

0

i15

• Hold d to LEN (-11/+6/+6)

#Lars-1+2

1+2

m

?

-12

KND

i25

pc8~

#Lars-3+4

3+4

m

?

-8

KND

i17

pc8~

Heat Engager

f

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-f+1

f+1

h

?

?

?

i13

#Lars-f+1,2

f+1,2

h,​m

10?

-5

+6

• Transition to SEN
• Hold B to stop transition (-8/+3/+3)

#Lars-f+1,2,2

f+1,​2,3

h,​m,​m

10,​11?

-5

KND

• Transition to DEN
• Hold B to stop transition (-12/KND/KND)

#Lars-f+2

f+2

h

?

?

?

i12

#Lars-f+2,1

f+2,1

h,​h

10?

-5

+6

i12

• Transition to SEN
• Hold B to stop transition (-6/+5/+5)

#Lars-f+2,4

f+2,4

h,​h

10?

-12

KND

#Lars-f+1+4

f+1+4

m

28

-18

KND

i13

#Lars-f+1+2

f+1+2

m

?

-13

Launch

i15

df

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-d/f+1

d/f+1

m

?

-1

+5

i13

#Lars-d/f+2

d/f+2

m

?

-3

+9

KND

i14

• Transition to SEN
• Hold B to not transition (-11/+3/KND)

d

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-d+2

d+2

m

?

0c

+8c

KND

i18

• Hold d for FC

#Lars-d+3

d+3

l

?

?

?

i15

#Lars-d+3,1+2

d+3,1+2

l,​h,​h

8?

-7

+4

db

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-d/b+1

d/b+1

l

-12

-1

i19

#Lars-d/b+1,1

,1

,​h

-12

-1

• Hold d to LEN

Error querying parent: Move with id = 'Lars-d/b+1' not found. If you've added 'Lars-d/b+1' in this edit, try saving the page twice. There is a known issue when looking up a move made in the same edit.

#Lars-d/b+2

d/b+2

m

?

-18

+3

i15

• Hold f to transistion to SEN

#Lars-d/b+2,1

,1

,​m

?

-8

+6

Error querying parent: Move with id = 'Lars-d/b+2' not found. If you've added 'Lars-d/b+2' in this edit, try saving the page twice. There is a known issue when looking up a move made in the same edit.

#Lars-d/b+2,3

,3

,​m

?

-13

+8

Tornado

Error querying parent: Move with id = 'Lars-d/b+2' not found. If you've added 'Lars-d/b+2' in this edit, try saving the page twice. There is a known issue when looking up a move made in the same edit.

#Lars-d/b+4

d/b+4

l

?

-26

+5

Launch

i21

cs

#Lars-d/b+1+2

d/b+1+2

l

?

-13

+6

+10

i26

• Hold d to DEN

b

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-b+1

b+1

m

?

-6

+4

i15

Homing

#Lars-b+2

b+2

m

?

-7

+4

i15

#Lars-b+2,1

b+2,1

m,​m

12?

-10

+4

#Lars-b+2,3

b+2,3

m,​h

12?

-8

KND

Tornado

#Lars-b+3

b+3

m

?

-12

+4

i17

• Hold f to SEN (-5/+11/+11)

#Lars-b+3,4

b+3,4

m,​h

14?

-8

KND

#Lars-b+4

b+4

m

55

-8

+8

Throw

i15

#Lars-b+1+2

b+1+2

m,​m

?

-9

+9KG

i21

Homing

u

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

Motion Input

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-f,f+2

f,f+2

m

?

-13

Launch

i21

Tornado

#Lars-f,f+4

f,f+4

l

?

-31

?

i21

#Lars-f,f+4,2

,2

h

?

?

+9

• Transition to DEN

Error querying parent: Move with id = 'Lars-f,f+4' not found. If you've added 'Lars-f,f+4' in this edit, try saving the page twice. There is a known issue when looking up a move made in the same edit.

#Lars-f,f+4,3

,3

m

?

?

-3

Error querying parent: Move with id = 'Lars-f,f+4' not found. If you've added 'Lars-f,f+4' in this edit, try saving the page twice. There is a known issue when looking up a move made in the same edit.

Crouch

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

WS

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

DEN (Dynamic Entry)

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-f+3

f+3

• Transition to DEN

#Lars-DEN.f

DEN.f

• Transition to SEN

#Lars-DEN.1

DEN.1

h

?

+1

+8

i11

• Hold f to SEN (-3/+4/+4)

#Lars-DEN.1,2

DEN.1,2

hh

14?

-6

+17

Heat Engager

#Lars-DEN.2

DEN.2

m

?

-7

+7

Launch

i17

• Hold u/f to AVA (?/+9/+9)

#Lars-DEN.3

DEN.3

m

?

+3

+17

i22

Heat Engager

Homing

• Transition to SEN

#Lars-DEN.4

DEN.4

l

?

-12

+1

i23

• Hold d to LEN

#Lars-DEN.1+2

DEN.1+2

h

?

-10

Launch

i12

Tornado

#Lars-DEN.3+4

DEN.3+4

l

?

-14

-3

+5s

i22

• Hold f to SEN (-7/+4/+12)

#Lars-DEN.2+3

DEN.2+3

Throw

40

i11

SEN (Silent Entry)

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-SEN.b

SEN.b

• Transition to DEN

#Lars-SEN.1

SEN.1

m

-6

KND

i12

Heat Engager

#Lars-SEN.2

SEN.2

l

-12

+6s

Launch

i12

#Lars-SEN.3

SEN.3

m

-14

Launch

i14

#Lars-SEN.4

SEN.4

h

-9

KND

i7

pc8~

Homing

#Lars-SEN.1+2

SEN.1+2

m

-9

KND

i14

Tornado

#Lars-SEN.3+4

SEN.3+4

m,​m

0s

KND

i13

Floor Break

LEN (Limited Entry)

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

#Lars-LEN.1

LEN.1

l

?

-12

+4s

i16

#Lars-LEN.2

LEN.2

m

?

-9

KND

i16

Tornado

Others

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.

Throws

NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.

AltOther inputs that also perform this move, written in notation.

InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.

Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings,​ the hit level of the previous moves in the string is shown but washed out.

DamageHow much damage the move does without any modifiers.For strings,​ the damage of the previous moves in the string is shown but washed out.

RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.

Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.

Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.

BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.

HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.

CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.

StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.

StatesThe frames where the attacker is in any special states, e.g. jump, parry, or powercrush.

RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.

NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.