Allows the use of ETGF and EWGF without just input (consumes heat without just input)
Allows use of formidable lightning-infused techniques (H.uf+4,1, d+3,H.2, etc.)
Gives Wind God's Kamae (FUJ) attack reversal effect against high and mid attacks (H.FUJ.P)
Able to enter powered up state: Mishima-Style Ultimate Technique: Warrior Instinct (WAR)
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
Heihachi remains in stance indefinitely unless a move is used
Actionable after 40f
df
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
Can be performed after any number of f,n,d,DF+4 lows
RAI (Thunder God's Kamae)
The stance name is temporary until the community decides on one.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
The stance name is temporary until the community decides on one.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
Doesn't require a just frame input for Electric or Omen Thunder God Fist
WAR (Warrior Instinct)
The stance name is temporary until the community decides on one.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
NameThe name of the move in the English localization.Most often directly from the in-game movelist, but can also be a community name.
AltOther inputs that also perform this move, written in notation.
InputThe input to perform the move, written in notation. This is often used as the move's name.For strings, the input of the previous moves in the string is shown but washed out.
Hit levelThe hit level of the move.Capital letters mean it hits grounded.For strings, the hit level of the previous moves in the string is shown but washed out.
DamageHow much damage the move does without any modifiers.For strings, the damage of the previous moves in the string is shown but washed out.
RangeThe maximum range recorded of the move hitting Lars on-axis. (For Tekken 7, it's vs Heihachi.) Assume an error of about ±0.03.For strings, this is the range of the whole string.This measurement shouldn't on its own be used to compare characters: larger characters get more "range" by this measure, but their opponents do too.
Left TrackingThe tracking score to the attacker's left.Roughly speaking, when up close, if the defender sidesteps or sidewalks right for no more than this many frames, the move still connects.
Right TrackingThe tracking score to the attacker's right.Roughly speaking, when up close, if the defender sidesteps or sidewalks left for no more than this many frames, the move still connects.
BlockThe frame advantage on block.Blank if the move can't be blocked (e.g., an unblockable or an aerial attack).For breakable throws, this is the frame advantage when the throw is broken.
HitThe frame advantage on hit.Blank if the move is not an attack, e.g. is a stance transition only.For throws, this is the frame advantage after the throw.
CHThe frame advantage on counter hit.Blank if this is the same as on normal hit, i.e. there is no special behavior on counter hit.
StartupThe active frames of the attack. The "i" stands for "impact", i.e. impact frame.If there is more than one hit, a comma indicates that frame 1 is now the frame after the last active frame of the previous hit.For strings, therefore, this usually has a leading comma.
RecoveryThe total number of frames, the recovery frames, and what stance the move recovers in, if any.The "t" stands for total and "r" for recovery. If no stance is listed, the move recovers in the default, standing position.For strings, the total frame count is from the start of the string with no delays.
NotesAnything that doesn't fit elsewhere.Many common move properties, such as whether a string can be delayed, go here.See Movelist#Notes for standard wording of common properties.
